Pricing is subject to changes without notice. Mylaboratories reserve the right to change these term and condition at anytime without prior notice.
EP110
Features
Built-In Clock
Enables printing time and date information even with a balance that doesn't have a clock function.
Enhanced Support for ISO/GLP
EP-110 can output other information based on your demands together with measured values.
OLED Dot Matrix Display
Offers easy-to-read, brightly illuminated OLED display.
Automatically Set
Automatically sets the appropriate communication with a balance. An operator doesn't have to worry about its setting.
Pipette calibration
Calibrate capacity of pipette and flask
User-defined calculation
Operator can set coefficients
(handy for converting result to local unit)
Tare/Net/Gross weight printing
Print out Tare/Net/Gross weight separately
SUM mode
Print out the total values of samples
Averaging mode
Print out the average of samples
Formulation mode
Print out each sample's weight independently when blending samples
Comparator mode
Print out result whether weight of sample is within target range
Interval printing mode
Print out current weight at a regular interval
Specifications:
Compatible Balance Models:
AU, AT, UW/UX, TW/TX, TXB, BW-K/BX-K, ELB, AW/AX/AY series, MOC63u
Display
OLED 128 x 64 Dot Matrix Display
Protected Date Setting
Prevents unintended changes of time and date setting.
Printing
- Method: 8-pin reciprocating impact dot matrix
- Speed : Approx. 1.7 lines/sec. Printer head life
: 1 million linesCharacter size
: Approx. W1.7 mm × H2.6 mm
Interface
RS-232 DB9
Power Supply
AC adapter: Input 100 to 240 V AC, 50/60 Hz; Output 12 V DC /1500 mA
Power consumption: 8 W (while printing)Standby power
: 0.5 W (when not printing)
Installation Environment
Temperature 5 to 45 °C, humidity 10 to 80 % No condensation
EP100
Features
Built-In Clock
Enables printing time and date information even with a balance that doesn't have a clock function.
Enhanced Support for ISO/GLP
EP-100 can output time/signature information.
Automatically Set
Automatically sets the appropriate communication with a balance. An operator doesn't have to worry about its setting.
Specifications:
Compatible Balance Models:
AU, AT, UW/UX, TW/TX, TXB, BW-K/BX-K, ELB, AW/AX/AY series, MOC63u
Printing
- Method: 8-pin reciprocating impact dot matrix
- Speed : Approx. 1.7 lines/sec. Printer head life
: 1 million linesCharacter size
: Approx. W1.7 mm × H2.6 mm
Interface
RS-232 DB9
Power Supply
AC adapter: Input 100 to 240 V AC, 50/60 Hz; Output 12 V DC /1500 mA
Power consumption: 8 W (while printing)Standby power
: 0.5 W (when not printing)
Installation Environment
Temperature 5 to 45 °C, humidity 10 to 80 % No condensation
